How severe is CVE-2026-46264?

CVE-2026-46264 has a CVSS score of 8.8/10, rated HIGH. Immediate patching is strongly recommended.

Which products are affected by CVE-2026-46264?

Affected package information for CVE-2026-46264 is not yet fully mapped. Check the official advisory links for details.

How do I patch CVE-2026-46264?

Apply the linux linux kernel security patch or hotfix for CVE-2026-46264 on the affected version, following the vendor advisory for your exact build.

How do I detect CVE-2026-46264 across my infrastructure?

Inventory every linux linux kernel deployment and check each version against the affected-products list above. Because the exploit targets the running system rather than your application code, also watch for exploitation at the network and runtime layer — O3 flags the exploit behaviour from runtime telemetry and egress traffic even before a vulnerable build is confirmed.

How do I mitigate CVE-2026-46264 if there is no patch (or I can't update yet)?

Cut exposure now: restrict the management/admin interface to trusted networks, segment the device, and apply the vendor's recommended configuration mitigations and any WAF/IPS signature. O3's runtime protection blocks the exploit chain at execution, holding the line on unpatched or end-of-life systems until you can patch.

How does O3 Security protect against CVE-2026-46264?

O3 detects and blocks CVE-2026-46264 exploitation at runtime: eBPF exploit-chain detection, plus L7 egress monitoring that catches the post-exploitation callback and severs the attacker's outbound channel.

Is CVE-2026-46264 actively exploited in the wild?

No public exploit code has been indexed for CVE-2026-46264 yet. This does not mean the vulnerability cannot be exploited — absence of public exploits does not imply safety. Apply the recommended fix and use O3 Security to monitor your exposure.

What is the EPSS score for CVE-2026-46264?

CVE-2026-46264 has an EPSS (Exploit Prediction Scoring System) score of 0.1%, placing it in the 2th percentile of all CVEs. EPSS is maintained by FIRST.org and estimates the probability that a vulnerability will be exploited in the wild within the next 30 days. This score indicates relatively lower exploitation probability, though the CVSS severity should still guide your patching priority.

What type of vulnerability is CVE-2026-46264?

CVE-2026-46264 is classified as Use After Free (CWE-416). This weakness type describe the underlying flaw category, which helps determine the potential impact and the right class of mitigation.

Which products and versions are affected by CVE-2026-46264?

CVE-2026-46264 affects linux linux kernel. Check the affected-products list on this page against your deployed version to confirm exposure.

When was CVE-2026-46264 published, and has it been updated?

CVE-2026-46264 was published on June 3, 2026 and was last updated on June 17, 2026. Advisory data evolves as severity scores, affected ranges, and exploit intelligence are revised — always check the latest version of the advisory before acting.

CVE-2026-46264

HIGH

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix sysfs initialization In case of devm_add_action_or_reset() failure the provided cleanup action will…

Published

Jun 3, 2026

Updated

Jun 17, 2026

Affected

0 pkgs

Patched

None yet

Exploits

None indexed

EPSS Exploitation Probability

via FIRST.org ↗

0.1%probability of exploitation in next 30 days

Lower Risk2th percentile0.00%

EPSS (Exploit Prediction Scoring System) is a daily probability model maintained by FIRST.org. It estimates the likelihood a CVE will be exploited in production environments within the next 30 days, derived from real-world threat intelligence signals.

Description

In the Linux kernel, the following vulnerability has been resolved:

drm/xe/pf: Fix sysfs initialization

In case of devm_add_action_or_reset() failure the provided cleanup action will be run immediately on the not yet initialized kobject. This may lead to errors like:

[ ] kobject: '(null)' (ff110001393608e0): is not initialized, yet kobject_put() is being called. [ ] WARNING: lib/kobject.c:734 at kobject_put+0xd9/0x250, CPU#0: kworker/0:0/9 [ ] RIP: 0010:kobject_put+0xdf/0x250 [ ] Call Trace: [ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe] [ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe] [ ] xe_sriov_init_late+0x5f/0x2c0 [xe] [ ] xe_device_probe+0x5f2/0xc20 [xe] [ ] xe_pci_probe+0x396/0x610 [xe] [ ] local_pci_probe+0x47/0xb0

[ ] refcount_t: underflow; use-after-free. [ ] WARNING: lib/refcount.c:28 at refcount_warn_saturate+0x68/0xb0, CPU#0: kworker/0:0/9 [ ] RIP: 0010:refcount_warn_saturate+0x68/0xb0 [ ] Call Trace: [ ] kobject_put+0x174/0x250 [ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe] [ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe] [ ] xe_sriov_init_late+0x5f/0x2c0 [xe] [ ] xe_device_probe+0x5f2/0xc20 [xe] [ ] xe_pci_probe+0x396/0x610 [xe] [ ] local_pci_probe+0x47/0xb0

Fix that by calling kobject_init() and kobject_add() separately and register cleanup action after the kobject is initialized.

Also make this cleanup registration a part of the create helper to fix another mistake, as in the loop we were wrongly passing parent kobject while registering cleanup action, and this resulted in some undetected leaks.

(cherry picked from commit 98b16727f07e26a5d4de84d88805ce7ffcfdd324)

Affected Products

1 product · 1 configurations

linux kernellinux

≥ 6.19 && < 6.19.4

range

Detection & mitigation playbook

Vendor / appliance

Detect
Inventory every linux linux kernel deployment and check each version against the affected-products list above. Because the exploit targets the running system rather than your application code, also watch for exploitation at the network and runtime layer — O3 flags the exploit behaviour from runtime telemetry and egress traffic even before a vulnerable build is confirmed.
Fix
Apply the linux linux kernel security patch or hotfix for CVE-2026-46264 on the affected version, following the vendor advisory for your exact build.
Workarounds
Cut exposure now: restrict the management/admin interface to trusted networks, segment the device, and apply the vendor's recommended configuration mitigations and any WAF/IPS signature. O3's runtime protection blocks the exploit chain at execution, holding the line on unpatched or end-of-life systems until you can patch.
How O3 protects you
O3 detects and blocks CVE-2026-46264 exploitation at runtime: eBPF exploit-chain detection, plus L7 egress monitoring that catches the post-exploitation callback and severs the attacker's outbound channel.

Tailored to CVE-2026-46264. Runtime protection reduces exposure until a permanent patch is applied and verified — it complements patching, it doesn't replace it.

Frequently Asked Questions

In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Fix sysfs initialization In case of devm_add_action_or_reset() failure the provided cleanup action will be run immediately on the not yet initialized kobject. This may lead to errors like: [ ] kobject: '(null)' (ff110001393608e0): is not initialized, yet kobject_put() is being called. [ ] WARNING: lib/kobject.c:734 at kobject_put+0xd9/0x250, CPU#0: kworker/0:0/9 [ ] RIP: 0010:kobject_put+0xdf/0x250 [ ] Call Trace: [ ] xe_sriov_pf_sysfs_init+0x21/0x100 [xe] [ ] xe_sriov_pf_init_late+0x87/0x2b0 [xe] [ ] x

O3 Security · Runtime Protection

Is CVE-2026-46264 being exploited in your environment?

O3's eBPF runtime sensors and L7 egress monitoring detect and block the CVE-2026-46264 exploit chain at execution — protecting unpatched and end-of-life systems until the vendor patch is applied.

Protect my workloads How runtime protection works