How severe is CVE-2026-46250?

CVE-2026-46250 has a CVSS score of 7.3/10, rated HIGH. Immediate patching is strongly recommended.

Which products are affected by CVE-2026-46250?

Affected package information for CVE-2026-46250 is not yet fully mapped. Check the official advisory links for details.

How do I patch CVE-2026-46250?

Apply the linux linux kernel security patch or hotfix for CVE-2026-46250 on the affected version, following the vendor advisory for your exact build.

How do I detect CVE-2026-46250 across my infrastructure?

Inventory every linux linux kernel deployment and check each version against the affected-products list above. Because the exploit targets the running system rather than your application code, also watch for exploitation at the network and runtime layer — O3 flags the exploit behaviour from runtime telemetry and egress traffic even before a vulnerable build is confirmed.

How do I mitigate CVE-2026-46250 if there is no patch (or I can't update yet)?

Cut exposure now: restrict the management/admin interface to trusted networks, segment the device, and apply the vendor's recommended configuration mitigations and any WAF/IPS signature. O3's runtime protection blocks the exploit chain at execution, holding the line on unpatched or end-of-life systems until you can patch.

How does O3 Security protect against CVE-2026-46250?

O3 detects and blocks CVE-2026-46250 exploitation at runtime: eBPF exploit-chain detection, plus L7 egress monitoring that catches the post-exploitation callback and severs the attacker's outbound channel.

Is CVE-2026-46250 actively exploited in the wild?

No public exploit code has been indexed for CVE-2026-46250 yet. This does not mean the vulnerability cannot be exploited — absence of public exploits does not imply safety. Apply the recommended fix and use O3 Security to monitor your exposure.

What is the EPSS score for CVE-2026-46250?

CVE-2026-46250 has an EPSS (Exploit Prediction Scoring System) score of 0.1%, placing it in the 3th percentile of all CVEs. EPSS is maintained by FIRST.org and estimates the probability that a vulnerability will be exploited in the wild within the next 30 days. This score indicates relatively lower exploitation probability, though the CVSS severity should still guide your patching priority.

Which products and versions are affected by CVE-2026-46250?

CVE-2026-46250 affects linux linux kernel. Check the affected-products list on this page against your deployed version to confirm exposure.

When was CVE-2026-46250 published, and has it been updated?

CVE-2026-46250 was published on June 3, 2026 and was last updated on June 17, 2026. Advisory data evolves as severity scores, affected ranges, and exploit intelligence are revised — always check the latest version of the advisory before acting.

CVE-2026-46250

HIGH

In the Linux kernel, the following vulnerability has been resolved: MIPS: Work around LLVM bug when gp is used as global register variable On MIPS, __current_thread_info is defined…

Published

Jun 3, 2026

Updated

Jun 17, 2026

Affected

0 pkgs

Patched

None yet

Exploits

None indexed

EPSS Exploitation Probability

via FIRST.org ↗

0.1%probability of exploitation in next 30 days

Lower Risk3th percentile0.00%

EPSS (Exploit Prediction Scoring System) is a daily probability model maintained by FIRST.org. It estimates the likelihood a CVE will be exploited in production environments within the next 30 days, derived from real-world threat intelligence signals.

Description

In the Linux kernel, the following vulnerability has been resolved:

MIPS: Work around LLVM bug when gp is used as global register variable

On MIPS, __current_thread_info is defined as global register variable locating in $gp, and is simply assigned with new address during kernel relocation.

This however is broken with LLVM, which always restores $gp if it finds $gp is clobbered in any form, including when intentionally through a global register variable. This is against GCC's documentation[1], which requires a callee-saved register used as global register variable not to be restored if it's clobbered.

As a result, $gp will continue to point to the unrelocated kernel after the epilog of relocate_kernel(), leading to an early crash in init_idle,

[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90 [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY [ 0.000000] Tainted: [W]=WARN [ 0.000000] Hardware name: loongson,loongson64v-4core-virtio [ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000 [ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240 [ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001 [ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002 [ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80 [ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80 [ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90 [ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90 [ 0.000000] Hi : 0000000000000000 [ 0.000000] Lo : 0000000000000000 [ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270 [ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270 [ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL [ 0.000000] Cause : 00000008 (ExcCode 02) [ 0.000000] BadVA : 0000000000000000 [ 0.000000] PrId : 00006305 (ICT Loongson-3) [ 0.000000] Process swapper (pid: 0, threadinfo=(ptrval), task=(ptrval), tls=0000000000000000) [ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528 [ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000 [ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258 [ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98 [ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270 [ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0 [ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8

This bug has been reported to LLVM[2] and affects version from (at least) 18 to 21. Let's work around this by using inline assembly to assign $gp before a fix is widely available.

Affected Products

1 product · 7 configurations

linux kernellinux

≥ 6.19 && < 6.19.4

range

Detection & mitigation playbook

Vendor / appliance

Detect
Inventory every linux linux kernel deployment and check each version against the affected-products list above. Because the exploit targets the running system rather than your application code, also watch for exploitation at the network and runtime layer — O3 flags the exploit behaviour from runtime telemetry and egress traffic even before a vulnerable build is confirmed.
Fix
Apply the linux linux kernel security patch or hotfix for CVE-2026-46250 on the affected version, following the vendor advisory for your exact build.
Workarounds
Cut exposure now: restrict the management/admin interface to trusted networks, segment the device, and apply the vendor's recommended configuration mitigations and any WAF/IPS signature. O3's runtime protection blocks the exploit chain at execution, holding the line on unpatched or end-of-life systems until you can patch.
How O3 protects you
O3 detects and blocks CVE-2026-46250 exploitation at runtime: eBPF exploit-chain detection, plus L7 egress monitoring that catches the post-exploitation callback and severs the attacker's outbound channel.

Tailored to CVE-2026-46250. Runtime protection reduces exposure until a permanent patch is applied and verified — it complements patching, it doesn't replace it.

Frequently Asked Questions

In the Linux kernel, the following vulnerability has been resolved: MIPS: Work around LLVM bug when gp is used as global register variable On MIPS, __current_thread_info is defined as global register variable locating in $gp, and is simply assigned with new address during kernel relocation. This however is broken with LLVM, which always restores $gp if it finds $gp is clobbered in any form, including when intentionally through a global register variable. This is against GCC's documentation[1], which requires a callee-saved register used as global register variable not to be restored if it's

O3 Security · Runtime Protection

Is CVE-2026-46250 being exploited in your environment?

O3's eBPF runtime sensors and L7 egress monitoring detect and block the CVE-2026-46250 exploit chain at execution — protecting unpatched and end-of-life systems until the vendor patch is applied.

Protect my workloads How runtime protection works