CVE-2018-10562
CRITICALCVE-2018-10562 is a critical-severity (CVSS 9.8) OS Command Injection vulnerability in dasannetworks gpon router firmware. It is in CISA's Known Exploited Vulnerabilities catalog (added 2022-03-31) and has been used in ransomware campaigns — treat it as actively exploited and patch now. O3 Security detects and blocks CVE-2018-10562 exploitation at runtime via eBPF exploit-chain detection and L7 egress monitoring, even on unpatched systems.
An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router…
Exploitation Status
Actively exploited in the wild
- Confirmed by CISA's Known Exploited Vulnerabilities catalog on 2022-03-31 — including use in ransomware campaigns. Federal agencies were required to remediate by 2022-04-21.
- CISA assesses this as automatable — exploitation doesn’t require manual, per-target effort, which raises the odds of mass scanning and opportunistic attacks.
- A successful exploit gives an attacker total control of the affected component, not partial access.
Exploitation and automatability from CISA (KEV catalog and SSVC triage) for CVE-2018-10562.
EPSS Exploitation Probability
EPSS (Exploit Prediction Scoring System) is a daily probability model maintained by FIRST.org. It estimates the likelihood a CVE will be exploited in production environments within the next 30 days, derived from real-world threat intelligence signals.
How urgent is this, really
CVE-2018-10562 plotted by exploitation likelihood (EPSS) against impact (CVSS). The shaded corner — EPSS 50%+ and CVSS 7.0+ — is where this CVE sits: patch-first territory.
Where this sits among everything scored
Of 0 CVEs with a current EPSS score, this one falls in the ≥ 90% band (highlighted). Real counts from FIRST.org, not a sample — log-scaled since the landscape is heavily right-skewed.
Description
An issue was discovered on Dasan GPON home routers. Command Injection can occur via the dest_host parameter in a diag_action=ping request to a GponForm/diag_Form URI. Because the router saves ping results in /tmp and transmits them to the user when the user revisits /diag.html, it's quite simple to execute commands and retrieve their output.
Affected Products
gpon router firmwaredasannetworksResearch use only. For defensive security, authorized penetration testing, and academic research only. Never execute exploit code against systems without explicit written authorization.
GPON Routers - Authentication Bypass / Command Injection
by vpnmentor · May 3, 2018
Detection & mitigation playbook
Vendor / applianceDetect
Inventory every dasannetworks gpon router firmware deployment and check each version against the affected-products list above. Because the exploit targets the running system rather than your application code, also watch for remote code execution at the network and runtime layer — O3 flags the exploit behaviour from runtime telemetry and egress traffic even before a vulnerable build is confirmed.
Remediation status
No patch has shipped for CVE-2018-10562 yet — track the dasannetworks gpon router firmware advisory for a fixed release and apply the workarounds below in the meantime.
Mitigate without a patch
Cut exposure now: restrict the management/admin interface to trusted networks, segment the device, and apply the vendor's recommended configuration mitigations and any WAF/IPS signature. O3's runtime protection blocks the exploit chain at execution, holding the line on unpatched or end-of-life systems until you can patch.
How O3 protects you
O3 detects and blocks CVE-2018-10562 exploitation at runtime: eBPF exploit-chain detection, plus L7 egress monitoring that catches the post-exploitation callback and severs the attacker's outbound channel.
Tailored to CVE-2018-10562. Runtime protection reduces exposure until a permanent patch is applied and verified — it complements patching, it doesn't replace it.
Frequently Asked Questions
Is CVE-2018-10562 being exploited in your environment?
O3's eBPF runtime sensors and L7 egress monitoring detect and block the CVE-2018-10562 exploit chain at execution — protecting unpatched and end-of-life systems until the vendor patch is applied.